Product Name: SPH standard pressurized cylinder

Model: SPH

Pressure cylinder structure: pressure cylinder by the "cylinder" "Convert an empty oil drum," "supercharger" combination of three parts

= Split cylinder turbocharger + supercharger cylinder direct pressure turbocharger + supercharger direct pressure cylinder = cylinder preloaded turbocharger + supercharger cylinder Standard cylinder =

Description: Pre-pressure system to a pressurized cylinder hydraulic cylinder (pre-press section) and booster (booster section) for the integrated combination of the use by the compressed air as power source, the use of booster piston and the shaft section The size of the heart (ie, cross-sectional area of ​​different compression ratios, because the pressure constant, when the pressure from a big area of ​​hours, then the pressure will vary with size), so as to achieve the air pressure to the number of times pressure effect.



         U works standard pressure cylinder (Figure)





Applications
Stamp marking, bending profiles, die punching, cutting steel, profiles touch welding, extrusion molding, compression level alignment, riveting, forging, sheet metal integer, close assembly, riveting connection, metal stamping.




Product description:

Standard pressure cylinder - pressure that can be reached using general hydraulic cylinder of the higher power, not the hydraulic unit.



Product Features:

Standard pressure cylinder

Speed:
Movement speed faster than the hydraulic, pneumatic, and more stable;

Easy to use:
Cylinder fitted simple, easy to adjust output, easy to use and maintenance;

Contribute to large:
Conditions in the same way up to the higher power of hydraulic machines, non-pure air system can be achieved;

Low prices:
Lower price than the hydraulic systems equipment;

Easy to maintain:
Because of simple structure, it is easy to maintain than the hydraulic system;

Low energy consumption:
Sustained pressure or stop the action, not as pure as the hydraulic system, the motor must continue to operate, it can save energy, and power source to facilitate easy access, the actual energy consumption is equivalent to hydraulic system 10% -30%;

No leakage:
Energy conversion, it can be done without fear of leakage of zero pollution;

Without compromising the mold:
To meet the technology needs, punch pressure and stroke can be achieved within the specified range stepless adjustable;

Installation is easy:
There are a variety of installation methods, depending on the workplace can be installed at any angle and position;

Soft landing:
Press the soft place technology to make noise when you move and protect your mold;

A small fault:
Temperature of the hydraulic system without problems;

Space is small:
And the hydraulic cylinder with the ordinary compared to the space area can be less than 50% or more;